| Model |
C9130AXE-S |
| Software |
● Cisco Unified Wireless Network Software Release 8.10 MR1 or later |
| ● Cisco IOS XE Software Release 17.1.1 or later |
| Supported wireless LAN controllers |
● Cisco Catalyst 9800 Series Wireless Controllers |
| ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities |
● 4x4 MIMO with four spatial streams |
| ● Maximal Ratio Combining (MRC) |
| ● 802.11n and 802.11a/g |
| ● 20- and 40-MHz channels |
| ● PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) |
| ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) |
| ● 802.11 Dynamic Frequency Selection (DFS) |
| ● Cyclic Shift Diversity (CSD) support |
| 802.11ac |
● 8x8 downlink MU-MIMO with eight spatial streams |
| ● MRC |
| ● 802.11ac beamforming |
| ● 20-, 40-, 80-, and 160-MHz channels |
| ● PHY data rates up to 3.4 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| ● Wi-Fi Protected Access (WPA) 3 support |
| 802.11ax |
● 8x8 uplink/downlink MU-MIMO with eight spatial streams |
| ● Uplink/downlink OFDMA |
| ● TWT |
| ● BSS coloring |
| ● MRC |
| ● 802.11ax beamforming |
| ● 20-, 40-, 80-, and 160-MHz channels |
| ● PHY data rates up to 5.38 Gbps (8x8 80 MHz or Dual 4x4 80+80 MHz on 5GHz and 4x4 20 MHz on 2.4) |
| ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) |
| ● 802.11 DFS |
| ● CSD support |
| ● WPA3 support |
| Integrated antenna |
● 2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| ● 5 GHz: Peak gain 6 dBi, internal antenna, omnidirectional in azimuth |
| External antenna with smart antenna connector |
● The Cisco Catalyst 9130AXE Access Point is certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) |
| ● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios |
| ● Supports Self-Identifiable Antennas (SIA) on the smart antenna connector |
| ● Smart antenna connector is a compact multi-RF connector with 8-DART interface |
| ● Requires the AIR-CAB002-D8-R= 2 ft smart antenna connector when used with antennas with a RP-TNC connector |
| ● Requires the AIR-CAB003-D8-N= 3 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna |
| ● For more details, see the Catalyst 9130AX Series Getting Started Guide. |
| ● For more details on C9130AXE-STA, see C-ANT9104 Hardware Installation Guide |
| Interfaces |
● 1x 100M, 1G, 2.5G, 5G Multigigabit Ethernet (RJ-45) |
| ● Management console port (RJ-45) |
| ● USB 2.0 at 4.5W |
| Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) |
● Access point (without mounting brackets): |
| ◦ C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) |
| Weight |
Cisco Catalyst 9130AXE |
| ● 3.78 lb. (1.71 kg) |
| Input power requirements |
● 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE) |
| ● Cisco power injector, AIR-PWRINJ6= |
| ● 802.3af PoE |
| ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Environmental |
Cisco Catalyst 9130AXE |
| ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) |
| ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) |
| ● Operating temperature: -4° to 122°F (-20° to 50°C) |
| ● Operating humidity: 10% to 90% (noncondensing) |
| ● Operating altitude test: 40˚C, 9843 ft.(3000 m) |
| System memory |
● 2048 MB DRAM |
| ● 1024 MB flash |
| Available transmit power settings |
2.4 GHz |
5 GHz |
| ● 23 dBm (200 mW) |
● 26 dBm (400 mW) |
| ● -4 dBm(0.39 mW) |
● -1 dBm (0.79 mW) |
Khi mua về, phụ kiện nào có sẵn cho Cisco Catalyst 9130AXE-S vậy shop?
Thưa anh, khi mua sản phẩm Cisco Catalyst 9130AXE-S, anh thường nhận được các phụ kiện như adapter nguồn, cáp Ethernet, tài liệu hướng dẫn và có thể cả giá đỡ.
Cisco Catalyst 9130AXE-S có thể được quản lý từ xa không ạ?
Có, Cisco Catalyst 9130AXE-S có thể được quản lý từ xa thông qua Cisco DNA Center và các Bộ điều khiển mạng không dây (Cisco Wireless Controllers).
Shop ơi, mình đang phân vân khi lựa chọn tốc độ truyền WiFi của các dòng sản phẩm, shop nói rõ hơn về tốc độ truyền dữ liệu tối đa mà C9130AXE-S có thể đạt được là bao nhiêu, và nó hoạt động như thế nào trong môi trường mạng mật
C9130AXE-S đạt 5.38 Gbps trong điều kiện lý tưởng. Trong môi trường mật độ cao, tốc độ sẽ được tối ưu nhờ Wi-Fi 6, MU-MIMO và OFDMA hỗ trợ xử lý đa thiết bị.